Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!usc!snorkelwacker!bloom-beacon!eru!luth!sunic!mcsun!ukc!tcdcs!swift.cs.tcd.ie!vax1.tcd.ie!doherty
From: doherty@vax1.tcd.ie
Newsgroups: comp.os.os2.misc
Subject: Trap 000D on booting OS/2 on 80486 clone please help !!
Message-ID: <6652.26b2c01b@vax1.tcd.ie>
Date: 29 Jul 90 10:53:15 GMT
Organization: Computer Laboratory, Trinity College Dublin
Lines: 30

I am installing 3-com 3+open on a no-name clone 80486-24,VGA,colour,8MB,
,300mb disk (set up as multiple 32mb drives),mouse and 3C503 card.
The set up involves installing a server adapted version of OS/2 supplied by
3Com as the first step. This seems to work OK and it tells me to reboot the
system to bring it up under OS/2 prior to installing 3+Open.

However this boot is not sucessfull and the system stops after displaying
on screen the following:

Trap 000D
AX=201C    etc
SI=000C    etc
CS=04A8    etc
CSLIM=6420 etc
CSACC=9B   etc
ERRCD=0000 etc
Exception in device drive A:
The system detected an internal processing error @ location #01E0:0797
The system is stopped.

I have sucessfully installed this 3+Open entry level system in a 386/25
from the same vendor.
The 486 clone runs quite happily as a DOS workstation to the 386/25
as a server.

Any suggestions would be very much appreciated !!!!

Michael Doherty, Assistant Director, Computer Lab, University of Dublin,
                 Trinity College, Dublin, Ireland.
                 tel 353-1-772941 x 1751 Fax 353-1-792587