Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!maverick.ksu.ksu.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpl-opus!hpnmdla!hpsad!jose
From: jose@hpsad.HP.COM (Jose Gomez-Rubio (SEED Student))
Newsgroups: comp.sys.amiga
Subject: UUCP 1.06D <-> UNIX UUCP
Message-ID: <730007@hpsad.HP.COM>
Date: 2 Aug 90 15:17:18 GMT
Organization: HP Signal Analysis Division - Rohnert Park, CA
Lines: 28

I've installed Matt's UUCP 1.06D on a A500.

I currently have a direct connect to a Unix box at 9600 baud.

I've constructed a NULL modem adapters with pins 2 & 3 switched and pin 7
straight through for a total of 3 active pins.

I can log on to the Unix box using VLT with no problem but when I attempt
to 'uucico -r1 -x9 -o -Sfoobar' on the A500 nothing happens.
I do have stuff queued up for the machine by 'dmail foobar!root'.

The L.sys entry is:
 foobar Any SER: 9600 5555555 "" \d\r\d\c ogin: uucp sword: uucp

I can invoke uucp by logging in as uucp on the Unix box using VLT.
I do get the message:
 shere=foobar

I've read the docs but no mention of how to handle a direct UUCP connection.
On Unix machines, it's pretty straightforward.  I even tried replacing the
L.sys phone number using a '-' as per Unix machine.  No go.

So my problem is that when uucico goes to debug mode at level 9, I see
what's happening but the no login response from the Unix box.

Appreciate any help.
--
jose@hpsad.hp.com