Path: utzoo!attcan!uunet!decwrl!ucbvax!van-bc!ubc-cs!alberta!herald.usask.ca!weyr!f70.n140.z1.FIDONET.ORG!Randy.Coghill
From: Randy.Coghill@f70.n140.z1.FIDONET.ORG (Randy Coghill)
Newsgroups: comp.sys.amiga
Subject: 3000 & Seagate 1096N
Message-ID: <739.26B91509@weyr.FIDONET.ORG>
Date: 1 Aug 90 00:38:02 GMT
Sender: ufgate@weyr.FIDONET.ORG (newsout1.26)
Organization: FidoNet node 1:140/70 - Double Check, Regina Sask
Lines: 18

I am having a problem getting my 3000 to autoboot from a Seagate
1096N hard drive.  If I wait for the hard drive to fully initialize
the then do the ol' three finger salute the drive will autoboot fine
but will not unpon powerup.  The 2091 has a jumper you can set to
increase the wait time, is there one on the 3000 to make it wait
longer for the hard drive?


Thanks,

Randy


--  
Randy Coghill - via FidoNet node 1:140/22
UUCP: ...!alberta!dvinci!weyr!70!Randy.Coghill
Domain: Randy.Coghill@f70.n140.z1.FIDONET.ORG
Standard Disclaimers Apply...