Path: utzoo!attcan!uunet!cadence!cadence!baeder
From: baeder@cadence.com (D. Scott Baeder; x299)
Newsgroups: comp.sys.amiga.tech
Subject: DMCS, MIDI, and the 1.3.2 serial.device = GURU
Keywords: guru, serial.device, dmcs
Message-ID: <1990Jul30.152503.27962@cadence.com>
Date: 30 Jul 90 15:25:03 GMT
Sender: usenet@cadence.com (USENET News)
Reply-To: baeder@cadence.com
Organization: Cadence ACAE Division
Lines: 21

I finally tracked down my crashing of DMCS. (I recently upgraded my
A1000 to a 2500/30) It only happens if I activated the MIDI.  At
first, I thought it might be the '030, but it was also happening on my
A1000...Finally I tried BOOTING off the original disk...this is what
finally led me to look at the serial.device

What is the difference between 1.3 and 1.3.2's serial.device??? (if
exact version numbers/sizes are required to answer this, I can supply
them...I left all my detailed notes at home) I noticed that DMCS works
fine with 1.2, and 1.3 versions of the file, but when I try to use the
1.3.2 version I get a nasty guru (illeagle instruction...again,
specifics I left at home...like an idiot)

In any case, I have dropped back to the 1.3 version, BUT, inquiring
mids what to know...also, is this a problem in the 2.0 software??  You
don't actually need to use MIDI, just activate it on the instruments
menu...

thanks..

scott