Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!lgc.lgc.com!max
From: max@lgc.com (Max Heffler)
Newsgroups: comp.sys.apple2
Subject: Re: SCSI disk problem revisited...
Summary: My problems are solved
Keywords: SCSI ID had to be 0, when all manuals suggested 6
Message-ID: <1990Jul31.232917.24427@lgc.com>
Date: 31 Jul 90 23:29:17 GMT
References: <1990Jul31.044711.12912@lgc.com> <4427UD182050@NDSUVM1>
Sender: max@lgc.com
Organization: Landmark Graphics Corp., Houston, Tx
Lines: 11

My SCSI problemes were resolved with 2 fixes.  I jumpered the drive to supply
term power to the bus and then changed SCSI ID to 0.  The manual has
recommended 6.  I tried 6 and 1 which both fail to see the drive.  ID 0
works.  And yes I have 20 32M paritions.  I am thinking about removing the last
15 or 16 until I need them, so screen painting won't take so long (at least
until I get my TWGS, next week)...
--
Max Heffler			internet: max@lgc.com
Landmark Graphics Corp.		uucp: ..!uunet!lgc!max
333 Cypress Run, Suite 100      phone: (713) 579-4751
Houston, Texas  77094