Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!udel!princeton!mccc!pjh
From: pjh@mccc.uucp (Pete Holsberg)
Newsgroups: comp.sys.att
Subject: Re: 3B2/310 & TB+
Keywords: Hardware Flow
Message-ID: <1990Jul28.155713.20713@mccc.uucp>
Date: 28 Jul 90 15:57:13 GMT
References: <3580@sactoh0.UUCP> <1990Jul25.062920.12777@robohack.UUCP> <16192@ucsd.Edu> <470@mtndew.UUCP>
Reply-To: pjh@mccc.UUCP (Pete Holsberg)
Organization: The College On The Other Side Of U. S. One
Lines: 19


Speaking of EPORTS, HFC, XON/XOFF and Trailblazer Plusses, I have a
question about setup when transferring files to an EPORT-equipped
3B2/400 from a 386 running MSDOS and ProYAM.  (FROM the 3b2, no
problem.)  I always get "Got ZRPOS errors" every 8-9K when uploading to
the 3B2.  I'm already set for "handshake slow", but it seems that
without HFC, I'm doomed to error recoveries and very slow transfer
rates.  Is there a way to change the setups of the two 'blazers
temporarily to reduce or eliminate the errors?  Is there a wway to turn
on HFC remotely (I have a second phone line so I could call in on it and
do something with the EPORT and/or the other 'blazer)?

Thanks,
Pete

-- 
Prof. Peter J. Holsberg      Mercer County Community College
Voice: 609-586-4800          Engineering Technology, Computers and Math
UUCP:...!princeton!mccc!pjh  1200 Old Trenton Road, Trenton, NJ 08690