Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpfcso!rjn
From: rjn@hpfcso.HP.COM (Bob Niland)
Newsgroups: comp.sys.hp
Subject: Re: 9000/370 Problems...
Message-ID: <7370182@hpfcso.HP.COM>
Date: 27 Jul 90 23:58:56 GMT
References: <13484@udenva.cair.du.edu>
Organization: Hewlett-Packard/FSY Ft.Collins,CO,USA
Lines: 6

re: > The H-P field guys keep insisting that it is a power problem because
    > that is the most likely cause of parity panics on a 370.

It could also be a [rare] defective backplane (bent connector, cold/loose
solder joint, etc.), in which case the most recent action of swapping out
the whole box will probably correct it.