Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker!bloom-beacon!eru!luth!sunic!kth.se!hemuli.tik.vtt.fi!tml From: tml@hemuli.tik.vtt.fi (Tor Lillqvist) Newsgroups: comp.sys.hp Subject: Re: Supported R4 server from HP via ftp Message-ID: Date: 31 Jul 90 17:03:00 GMT References: <101950138@hpcvlx.cv.hp.com> Sender: news@hemuli.tik.vtt.fi Organization: Technical Research Centre of Finland, Laboratory for Information Processing (VTT/TIK) Lines: 22 In-reply-to: jbb@hpcvlx.cv.hp.com's message of 28 Jul 90 00:12:16 GMT In article <101950138@hpcvlx.cv.hp.com> jbb@hpcvlx.cv.hp.com (Jim B. Byers) writes: An R4 server is available for the HP 9000 Series 300 and 400 machines. This server is faster on some displays than the sample server available from MIT on the X11 Release 4 tape (or from expo.lcs.mit.edu). Also, this server is supported by Hewlett-Packard on the HP-UX 9000 Series 300/400 versions 7.0 and 7.03. If you have access to the internet, you can get it via: 153$ ftp 15.255.72.15 (hpcvaaz.hp.com) Great! This is just the kind of support we HP customers who are fortunate enough to have Internet access appreciate. I have been running the MIT sample server (with the HP-supplied binary-only device dependent part) until now, but this version is faster, and more bug free, I hope. Once again, thanks. -- Tor Lillqvist, working, but not speaking, for the Technical Research Centre of Finland