Path: utzoo!attcan!uunet!mailrus!cs.utexas.edu!yale!venus!yalevm!maine!rfy630
From: RFY630@MAINE.BITNET (Chris Winne)
Newsgroups: comp.sys.ibm.pc.rt
Subject: Floating Point Processer not accessed?
Message-ID: <90214.104334RFY630@MAINE.BITNET>
Date: 2 Aug 90 14:43:34 GMT
Organization: University of Maine System
Lines: 11

We have a RT6151, with an advanced processor card and floating point
accelerator.  However, when I issue the command fptype, the machine
tells me I am using software emulation.  The floating point accelerator
has been installed with devices, and it checks out fine using
diagnostics.  I don't think it is really working however, since similar
(image processing) programs take at least as long on this machine as on
a zenith-286.  The only strange thing I can find is in installation
configuration, it finds the APC card and the FP card both in slot A,
with nothing in slot B.  Any suggestions (Why else would I write?)?
 
Chris Winne RFY630@Maine (bitnet)