Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!ncar!boulder!steelem
From: steelem@boulder.Colorado.EDU (STEELE MARK ALLEN)
Newsgroups: comp.sys.mac.hardware
Subject: SCSI Drives
Message-ID: <24103@boulder.Colorado.EDU>
Date: 29 Jul 90 20:03:26 GMT
Sender: news@boulder.Colorado.EDU
Reply-To: steelem@spot.Colorado.EDU (STEELE MARK ALLEN)
Distribution: usa
Organization: University of Colorado, Boulder
Lines: 24

20 meg hard internal hard drive. I just upgraded the mother board to a
SE/30. Earlier this week I purchased a Quatum 80 meg hard drive from
MacLand. The drive arrived in perfect condition. I wanted to have the
80 meg be the internal drive and the 20 meg (MiniScribe) be the external
drive so I removed both drive from there cases, didn't change any jumpers
on either drive (the Quantum had none anyway) and swapped them. So now
the Quantum is internal on the SE/30 and the MiniScribe in external in
the case from MacLand.
	Now the problem... The Quatum and SE/30 work great, no problems, the
MiniScribe however refuses to show up on the desktop, I called both
MacLand and MiniScribe and they told me how I should have their drive
set up, and I followed their instructions (leave the Quatum alone, move
the jumper on the MiniScribe to a different location to change the SCSI ID)
then I placed a SCSI terminator on the external drive and it still won't
show up on the desktop. I used the CDEV SCSI Probe 2.01 and if the external
drive is NOT powered on, it shows that the Quantum is SCSI ID = 0 and the
 to something else I could look for??
MacLand and MiniScribe have both been very helpful, and have given me 
plenty of their time but since its not working I would like to know if 
somebody else has had the same problem and how to fix it.
					Thanks in advance
					Mark Steele

steelem@spot.colorado.edu