Path: utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!usc!ucsd!ucbvax!AERO4.LARC.NASA.GOV!blbates
From: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854")
Newsgroups: comp.sys.sgi
Subject: Re:  3D plotting programs/packages??
Message-ID: <9008031130.AA02313@aero4.larc.nasa.gov>
Date: 3 Aug 90 11:30:33 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 21


   I have some very old information that I think is correct.  You
can buy Tecplot from:

   Amtec Engineering, Inc.
   11820 Northup Way, Suite 200
   Bellevue, WA 98005
   (603) 672-5032  or  (206) 827-3304

   Tecplot is suppose to run on PC's, Sun's, and SGI's and like
most software cost a lot, depending on platform.  It has a lot
of capability, but, is very slow on the SGI's.  If you can get
PLOT3D (and it is free for U.S. distribution), I'd use it.
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov