Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!pacbell.com!pacbell!att!mcdchg!ddsw1!olsa99!iosys!utekza!kevin
From: kevin@utekza.UUCP (Kevin Gribble)
Newsgroups: comp.unix.xenix
Subject: Re: Beta test of SCO XENIX 2.3 supplement available
Message-ID: <9@utekza.UUCP>
Date: 2 Aug 90 19:55:35 GMT
References: <8482@scorn.sco.COM> <1990Jul31.153316.9304@nshore.uucp>
Reply-To: kevin@utekza.UUCP (Kevin Gribble)
Organization: Unique Technology
Lines: 39

In article <1990Jul31.153316.9304@nshore.uucp> uunet!ncoast!nshore!steve (Stephen J. Walick) writes:
%As quoted from <8482@scorn.sco.COM> by rosso@sco.COM (Ross Oliver):
%
%+---------------
%| Please direct all inquiries to support@sco.com
%| ------------------------------------------------------------
%| 
%| The Santa Cruz Operation (SCO) Technical Support Department has developed 
%| a new Support Level Supplement (SLS) xnx155b, the SCO XENIX 386 2.3 
%| Maintenance Supplement UFM Release 2.1, ....
%| 
%| The phone number for sosco is (408) 425-3502 for 2400 baud modem and
%| (408) 429-1786 for Telebit Trailblazer modem....
%+---------------
%
%I have tried to obtain the files mentioned, and, though I do get a
%"CONNECT" with "sosco", a "login" is impossible since Friday of the
%past week (July 27 thru July 31).  I have tried both numbers and bps
%of 1200, 2400 (to send mail), 9600 and 19200 PEP (TBIT).  The best
%possible result was a "login" at 2400 (@ (408) 425-3502) only to get
%a "WRONG MACHINE NAME - failed" back (from the output).  **SOMETHNG
%SEEMS TO BE A-WRONG WITH "SOSCO"**  [ I have both 'email'ed and down-
%loaded SLS files several times in the past! ]
%
%[ "uutry" outputs available upon request ]  ** HELP **
%
%If reply is deemed necessary, reply to "uunet!ncoast!nshore!steve".
%Thank you....
%
%Steve Walick
%Data Phone:  (216) 942-1118 Telebit T-1000 @ 96/24/1200 baud at 8, N, 1

As far as I know you need setup for "sosco" login in your Systems file in 
/usr/lib/uucp. If you are running SCO UNIX/XENIX, have a look in the Systems
file and it will tell how to set it up. I'm not to sure about E-Mailing them


Kevin Gribble
kevin@utekza.UUCP