Path: utzoo!attcan!uunet!cs.utexas.edu!sdd.hp.com!ucsd!helios.ee.lbl.gov!epb2.lbl.gov!envbvs
From: envbvs@epb2.lbl.gov (Brian V. Smith)
Newsgroups: comp.windows.x
Subject: Re: X11R4 on VAXen
Keywords: gcc and fixincludes
Message-ID: <6354@helios.ee.lbl.gov>
Date: 3 Aug 90 17:32:00 GMT
References: <61940@bu.edu.bu.edu>
Sender: usenet@helios.ee.lbl.gov
Reply-To: envbvs@epb2.lbl.gov (Brian V. Smith)
Organization: lbl
Lines: 27
X-Local-Date: 3 Aug 90 10:32:00 PDT

In article <61940@bu.edu.bu.edu>, oneill@bass.bu.edu (Brian V O'Neill) writes:
|> I'm just not having very good luck with VAX systems these days...
|> 
|> I'm trying to compile X11R4 along with the servers for mainly VAXStation
|> 3100s running Ultrix 3.X. These systems already have UWS 2.0 installed, but
|> I would like to replace it with R4. I would also like to use the compiled
|> clients on our larger VAX systems.
|> 
|> I first configured for it to compile using GCC, and ran the make on a
|> VAXStation 3100 which did nothing else in the meantime. It compiled fine,
|> with a small error in xdm about encryption. However, all the clients respond
|> with "Can't assign requested address" if  the clients is run remotely, or
|> "Operation not supported" if run locally with the UWS server running. I
|> tried compiling on a MicroVAX with both gcc and cc, and no different. The
|> server also does not run.
|> 
|> 
|> GCC is at 1.37.1 and X11R4 is at fix-14.

Run the script 'fixincludes' which comes with gcc and recompile everything
that uses ioctl (I don't know specifically which ones, so it is safest
to recompile everything).

_____________________________________
Brian V. Smith    (bvsmith@lbl.gov)
Lawrence Berkeley Laboratory
I don't speak for LBL, these non-opinions are all mine.