Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!ucsd!brian
From: brian@ucsd.Edu (Brian Kantor)
Newsgroups: sci.electronics
Subject: Re: Termination of TTL <-> TTL cable
Message-ID: <16469@ucsd.Edu>
Date: 31 Jul 90 00:36:49 GMT
References: <26b48046.147d@petunia.CalPoly.EDU>
Distribution: na
Organization: The Avant-Garde of the Now, Ltd.
Lines: 9

One that works well for me:

Drive the cable with an LS240 or LS244.  Receive it with LS14s.
Terminate the receiver end with 220/330 packs.  Use twisted pairs or
alternate ground wires, or use a ground-plane ribbon cable.

Note that LS14s are slow, so you can't run blazingly fast signals down
this cable.
	- Brian