Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!fernwood!porky!eliabel.sf.ca.us!emeyer
From: emeyer@eliabel.sf.ca.us
Newsgroups: comp.dcom.modems
Subject: TB2500 Problems with uucico
Message-ID: <129@porky.UUCP>
Date: 7 Aug 90 20:21:55 GMT
Sender: emeyer@porky.UUCP
Distribution: usa
Organization: ELIABEL Corporation
Lines: 19

I just got two Telebit 2500 and I have problems setting them up with uucp.
I parametered them like described in my INTERACTIVE IX386 2.2 manual and
in the TB manual, and I did set up the UUCP S110=30 register to support
uucp on the TB. I have my port running at 19200 bauds.

Everything works fine, except that I get a lot of uucico timeouts.
Basically, it transfers a bunch of packets fast and after 5 or 10k
it stops and timeouts, then after a few seconds restarts.

uucico -d9 gives me 'alert' messages at every of such timeouts...

Is there something wrong in my setup or is my machine just not
fast enough to handle 19200 bauds?

--
Eric P. Meyer
ELIABEL Corp.
emeyer@eliabel.sf.ca.us
(415) 349 1021