Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!swrinde!ucsd!ucbvax!van-bc!oneb!icgnu!kmcvay
From: kmcvay@icgnu.UUCP (Ken McVay [1B Systems Management])
Newsgroups: comp.dcom.modems
Subject: Telebit setup: T2500 on lease line
Keywords: t2500,flow control
Message-ID: <155@icgnu.UUCP>
Date: 9 Aug 90 20:45:44 GMT
Distribution: na
Organization: icgnu -
Lines: 27

I've been banging my head against the wall here, trying to make two T2500's
behave themselves....

The modems are on each end of a leased phone line, and they have never really
performed reliably. I'm unfamiliar with the differences in operation when using
leased lines instead of dialup, and would appreciate some pointers, particularly
concerning flow control. The modem at this end is set as default AECM, with
the following exceptions:

S07=255
S41=002
S50=255
S51=005
S55=003
S101=001
S105=000
S110=001
S111=030
S255=000

Given the present performance (ie nearly useless most of the time) I have
no problem starting over at both ends....

The systems are running SCO Xenix 2.3.2, and both are using Wyse smart port
cards (don't know which ones just yet - I'm new around here).

Any and all helpful suggestions gratefully accepted!