Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!iuvax!news!cartan!ndmath!nstar!towers!robert
From: robert@towers.UUCP (Robert Hoquim)
Newsgroups: comp.periphs.scsi
Subject: Re: Wangtek 5150ES SCSI behavior
Message-ID: <82@towers.UUCP>
Date: 7 Aug 90 08:01:52 GMT
References: <450@bohra.cpg.oz>
Organization: The Twin Towers - Indianapolis, IN  USA
Lines: 20

als@bohra.cpg.oz (Anthony Shipman) writes:

>I have noticed some odd behavior with a Wangtek 5150ES. The
configuration is
>  AHA1542B controller
>  XT4380S    Maxtor disk
>  5150ES

>The format program in the ROM on the 1542B lists all of the SCSI IDs
>found. When only the disk drive is connected it just lists the drive as
>ID 0. When the tape is connected it lists the disk as ID 0 and the tape
>as all the IDs 1-7.

This is not normal, I would check the ID of the Wangtek.  What is the
results if you have just the Wangtek connected?  I would bet 0...

-- 
  Robert Hoquim                                 Small Systems Specialists
  (317)-255-6807                                8500 N. Meridian
..!nstar!towers!robert                          Indianapolis, IN.  46260