Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!dayvb!fac2
From: fac2@dayton.saic.com (Earle Ake)
Newsgroups: comp.sys.amiga
Subject: Re: JRCOMM
Message-ID: <1165.26c12380@dayton.saic.com>
Date: 9 Aug 90 12:49:04 GMT
References: <7208@helios.TAMU.EDU>
Organization: Science Applications Intl. Corp., Dayton, Ohio
Lines: 21

In article <7208@helios.TAMU.EDU>, n350bq@tamuts.tamu.edu (Duane Fields) writes:
> I am running JRComm on my Amiga 500 w/ a USR 9600 baud. I am unable to change
> the macros of each phone entry, clicking on macro accomplishes nothing!
> While I am here, what are the bad/good parts of locking the serial port
> to say 19.2 for a 2400 baud connection??

	You have to specify a filename for the macro first, then click on
macro to change it.  Shouldn't be a problem as long as you have flow control
enable from your Amiga to the modem.  I think the best would be RTS/CTS.  If
you don't, the Amiga will send much faster than the modem can pass data along
and it will lose data outbound.  It probably will not happen on incoming data
since the data is accepting data much slower than it passes it along to your
Amiga.

-- 
_____________________________________________________________________________
             ____ ____    ___
Earle Ake   /___ /___/ / /     Science Applications International Corporation
           ____//   / / /__                 Dayton, Ohio
-----------------------------------------------------------------------------
Internet: fac2%dayton.saic.com@uunet.uu.net    uucp: dayvb!fac2