Path: utzoo!attcan!uunet!snorkelwacker!mit-eddie!rutgers!cbmvax!cbmehq!cbmdeo!adspdk!hclausen
From: hclausen@adspdk.CBMNET (Henrik Clausen)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: A2091 + 2 SCSI drives
Message-ID: <hclausen.2193@adspdk.CBMNET>
Date: 5 Aug 90 01:36:44 GMT
References: <90216.004446JKT100@psuvm.psu.edu>
Lines: 20

>In article <90216.004446JKT100@psuvm.psu.edu> JKT100@psuvm.psu.edu (JKT) writes:
>I finally got a cable made to connect both the Quantum drives (a 40S and
>a 105S) to my 2091.  When I connect it and power up, though, my 2000
>only recognizes the 105S.

>   Both hard drives work fine when connected independently.

>  Is there anything I missed?

   Probably to (re?)move a jumper on one of the drives to give it another
SCSI address. Do they show up as the same unit when connected independently?
If so, this is the matter.

                            Have a nice day    -Henrik


--
|            Henrik Clausen, Graffiti Data (Fido: 2:230/22.33)           |
|           ...{pyramid|rutgers}!cbmvax!cbmehq!adspdk!hclausen           |
\__"Do not accept the heart that is the slave to reason" - Qawwali trad__/