Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!samsung!sdd.hp.com!ucsd!ucbvax!GW1.AGS.BNL.GOV!roger
From: roger@GW1.AGS.BNL.GOV (Roger A. Katz)
Newsgroups: comp.sys.apollo
Subject: dsp80 multibus server problem.
Message-ID: <9008091604.AA03752@gw1.ags.bnl.gov>
Date: 9 Aug 90 16:04:11 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 36

I have a dsp80, with 1.5Mbytes of memory. It has the following config:
System configured with 1.5 mb of memory.

  NODE CONFIGURATION
    Node Type:  DSP80
    Display type:  No display
    Peripheral configuration:
        Disks:  none
        Networks: Ring
        Peripheral bus:  Multibus-M20
        Tapes:  none
    Running diskless hosted by node 76B8.
when it was running 9.7 i had no trouble building a gpio device named
ibie, acquiring the device and using it.
I have a dsp80, with 2.0 mb of memory, running under 10.2 using the
gpio device ibie with out any trouble.
Now, though, i have removed the last 9.7 node from my network, and have
booted the 1.5 diskless node off of a 10.2 node, recreated the ibie
in its `node_data/dev directory, and get the following message from
aqdev.
$ wd
//acn90d01/sys/node_data.519d/dev
$ aqdev ibie
?(aqdev) M020 series node required to execute this object module (process manager/loader)
                   
                   What is this message telling me? Any ideas or suggestions will be
appreciated.

Roger.

Email: roger@gw1.ags.bnl.gov                Roger A. Katz
                                            AGS Software Controls Group
                                            Brookhaven National Laboratory
                                            Upton, N.Y. 11973-5000
                                            (516) 282-2732
I'm sure, I maybe wrong, but I'm sure.