Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!yale!mintaka!ogicse!plains!beckler@plains.NoDak.edu
From: beckler@plains.NoDak.edu (Dan Beckler)
Newsgroups: comp.sys.handhelds
Subject: Cable problem
Message-ID: <5455@plains.UUCP>
Date: 11 Aug 90 02:46:24 GMT
Sender: beckler@plains.UUCP
Organization: North Dakota State University, Fargo
Lines: 19


   Maybe someone can help me out.  I've finally found some pins small
 enough to make a serial cable for my 48SX.  The cable works fine to 
 transfer from the 48 to my PC......but that is not the case for the
 other way around.  Can anyone give me any clues to what the problem 
 is?   My cable is about 7 feet (I know it's probably too long) with the
 pins connected as follows: (IBM computer, 9-pin serial port)
                   HP           PC
                  ---          ---
                   1            1
                   2            2
                   3            3
                   4            5
  (numbering the HP pins with the #4 pin closest to the IR)
 Also, I'm using Procomm + as my Kermit server on my PC. Any help
 would be greatly appreciated.
                                -

                                -Dan