Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!tut!kannel!kim From: kim@lut.fi (Kimmo Suominen) Newsgroups: comp.sys.hp Subject: Re: lpr/lpd for HP-UX Message-ID: Date: 8 Aug 90 12:33:03 GMT References: <10@gauss.mmlai.UUCP> Sender: kim@kannel.lut.fi Organization: Lappeenranta University of Technology, Finland Lines: 21 In-reply-to: burzio@mmlai.UUCP's message of 7 Aug 90 23:05:32 GMT Disclaimer: These are my opinions unless otherwise stated >>>>> On 7 Aug 90 23:05:32 GMT, burzio@mmlai.UUCP (Tony Burzio) said: Tony> lpadmin -palw0 -ccombined -mrmodel -v/dev/null -ob3 -ocmrcmodel \ Tony> -osmrsmodel -orc -orplp -ormsun31 Tony> Note that the class is "combined", although printing to a class doesn't Tony> work anyway :-) Also, the printer queue on the BSD machine should be Tony> the same name as on your HP... 1) You don't have to use classes. Dunno if they work, because I don't use them. Our printers are to distributed. 2) The printer queue name doesn't have to be the same on both machines. It didn't have to be when I had 3.10 and it doesn't have to be now with 7.0. 3) NOTE: I haven't been using -orc (restrict cancel to owner). 4) IMHO the HP-UX Spooler works fine! -- Kim ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, "That's what ( Kimmo ! Lappeenranta U of Technology ! kim@lut.fi ) *I* think." ( Suominen ! Computing Centre * Finland ! KUULA::KIM ) ''''''''''''''''''''''''''''''''''''''''''''''''''''''