Path: utzoo!attcan!uunet!clyde.concordia.ca!IRO.UMontreal.CA!fasciano
From: fasciano@IRO.UMontreal.CA (Massimo Fasciano)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Sound Blaster Registers
Message-ID: <1990Aug7.153600.10175@IRO.UMontreal.CA>
Date: 7 Aug 90 15:36:00 GMT
Sender: news@IRO.UMontreal.CA
Reply-To: fasciano@degusse.UUCP (Massimo Fasciano)
Organization: Universite de Montreal
Lines: 27

Hi everybody,

  The soundblaster manual gives the adresses of all of the
  card's I/O ports but does not explain exactly how to use
  them...

  Suppose I wanted to write a simple program that reads samples
  from the A/D , stores them in memory, and then plays them back
  through the D/A (simple enough!). What would I do exactly?
  The manual mentions a read port for the A/D and a write port
  for the D/A but there is also and INIT port and control port.
  How do I use them?

  As for the ADLIB channels, does the ADLIB manual give more
  exact info than the SB manual? 


			Thanks in advance

			Massimo

(if you feel the info can help others, post it on the net, otherwise
e-mail me at fasciano@iro.umontreal.ca)

--

Massimo Fasciano (fasciano@iro.umontreal.ca)