Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker!apple!voder!dtg.nsc.com!my
From: my@dtg.nsc.com (Michael Yip)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: SuperVGA (800x600 & 1024x768)... Any suggestions?
Summary: NEC 3D
Keywords: monitor, SVGA
Message-ID: <1368@challenger.nsc.com>
Date: 7 Aug 90 22:22:01 GMT
References: <2359@east.East.Sun.COM>
Reply-To: my@challenger.UUCP (Michael Yip)
Distribution: na
Organization: National Semiconductor, Santa Clara
Lines: 14

Right now, I am using the NEC 2A monitor with the
Paradise VGA board.  The highest resolution that
I can display with Window 3.0 is 800x600x16.  It's
pretty good. And I recommend them.

I am also planning of getting a system with higher
resolution.  The NEC 3D will be a pretty good 
choice (I think) and the VRAM card will be able to 
display 1024x768x16(256?) in the interlace mode.
Interlace mode is "OK" but not too great for something
like circuit design or CAD drawing.

-- Mike
   my@dtg.nsc.com