Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!umich!mailrus!usenet.ins.cwru.edu!ncoast!dchou
From: dchou@NCoast.ORG (David Chou)
Newsgroups: comp.sys.ibm.pc.misc
Subject: re: TURBO on AMI
Message-ID: <1990Aug8.032327.21060@NCoast.ORG>
Date: 8 Aug 90 03:23:27 GMT
Organization: North Coast Public Access *NIX, Cleveland, OH
Lines: 12

As far as I know, my AMI Mark II motherboard does not support a TURBO
switch.  The only way to change speeds is through the keyboard.  There
is a connection from the board to support a display device, which I used
to connect to the turbo led and display on my case.  It sounds like your
turbo switch and light are connected together and not to a remote line.
In my situation, I had to make numerous adjustments before I got the
display and polarity of the various wires to match the motherboard.  My
turbo switch operates independently of the display - needless to say, it
sits there doing little except allow me to fiddle.

david chou  nocast!dchou@cwjcc.cwru.edu
             dchou@ncoast.org   (that's ncoast on the above line)