Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!uunet!wuarchive!zaphod.mps.ohio-state.edu!usc!apple!portal!cup.portal.com!rwp
From: rwp@cup.portal.com (Roger William Preisendefer)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: QEMM 5.0 & 3Com 3C503 Conflict
Message-ID: <32691@cup.portal.com>
Date: 11 Aug 90 18:34:11 GMT
References: <1033@lehi3b15.csee.Lehigh.EDU>
  <20012.26c32cdd@oregon.uoregon.edu>
Distribution: usa
Organization: The Portal System (TM)
Lines: 12

I ran into the same problem at work when we set up our Novell network and
our 3C503 cards.  The solution for us was to explicitely exclude the memory
that the card is mapped into.  On our configuration the line reads

device=qemm.sys RAM exclude=cc00-ccff

The RAM line allows you to load drivers into high memory using LOADHI, and
the exclude tells QEMM not to use the ethernet card's DMA location.

Hope this helps..

Roger Preisendefer