Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker!ai-lab!sbchanin
From: sbchanin@wheaties.ai.mit.edu (Steve Chanin)
Newsgroups: comp.sys.mac.comm
Subject: Re: TCP/IP connection tool
Message-ID: <9735@rice-chex.ai.mit.edu>
Date: 7 Aug 90 02:13:51 GMT
Reply-To: sbchanin@ai.mit.edu (Steven Chanin)
Organization: MIT Artificial Intelligence Laboratory
Lines: 32

Network Gurus:
	I've got a 5Meg SE/30 with a NuvoLink SC (SCSI <-> Ethernet
connector) and a 2 page display driven through the SE/30's internal
slot.  When I run NCSA Telnet 2.3 using its own TCP code, everything
is fine (which implies that the NuvoLink SC and the network are
working).  However, when I run MacX or the NCSA/BYU Telnet package
(both of which use MacTCP and the communications toolbox), I can't get
through to the network.  MacX gives the error "MacTCP Connection Tool
Error when initializing a connection: unknown error code -344" and
BYU/NCSA just quits.  Does anyone have ideas about how to get around
this problem?  I need to get MacX running on this machine ASAP.

Thanks,
Steve

System Information:
	Mac SE/30
	5 Meg RAM
	Finder		6.1.5
	MultiFinder	6.0.5
	System		6.0.5
	MacX		1.0a9
	NuvoLink SC	1.25 (driver)
	NuvoLink SC	1.25 (ROMs)
	AdminTCP	1.0
	MacTCP		1.0
	MacTCPtool	1.0d6 
-- 
===============================================================================
DOMAIN: sbchanin@ai.mit.edu
USMAIL: Steven Chanin, 1010 Mass Ave #57, Cambridge, Ma 02138
PHONE : (617) 876-1950