Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!snorkelwacker!usc!samsung!umich!umeecs!tksiew@dip.eecs.umich.edu
From: tksiew@dip.eecs.umich.edu (Teng-Kean Siew)
Newsgroups: comp.sys.mac.hardware
Subject: ImageWriter I
Message-ID: <3032@zipeecs.umich.edu>
Date: 9 Aug 90 18:03:30 GMT
Sender: news@zip.eecs.umich.edu
Distribution: na
Organization: University of Michigan EECS Dept, Ann Arbor, MI
Lines: 21


Dear netters,

I have this old ImageWriter I sitting by my desk, seemingly in good condition,
which does not have a cable. Can anyone out there help me with the pinouts of
the ImageWriter 1, so that I can make a cable for the printer to work with my
SE/30? The ImageWriter is so old that noone round these parts seem to know
what the pinouts are, or where to find info about it. I couldn't get a cable
from the local store either. Playing with a breakout box didn't get me very
far.

Specifically the printer has a DB-25 female connector at the back, and I would
like to make a cable to interface it to my SE/30 DIN-8 serial printer port.
Help as to which pin goes to which will be very greatly appreciated. 


------------------------------
Teng-Kean Siew
Real-Time Computing Laboratory
EECS Department
The University of Michigan