Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!rice!rice!sun-spots-request
From: b11!gibson@uunet.uu.net (Stanley Gibson)
Newsgroups: comp.sys.sun
Subject: Re: Maxtor LXT-200S
Keywords: Hardware
Message-ID: <1990Aug13.010041.4090@rice.edu>
Date: 8 Aug 90 20:50:44 GMT
Sender: sun-spots-request@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Originator: spots@titan.rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 297, message 12
X-Refs:  Original: v9n292, Replies: v9n295 v9n297

In article <1990Aug7.003304.1753@rice.edu> hargen@pdn.paradyne.com (Bill Hargen) writes:
>X-Sun-Spots-Digest: Volume 9, Issue 295, message 2

Maxtor LXT200 jumper information
>
>9-10:	The parity disable jumper is not currently supported.  When it is

>7-8:	With no jumper, the disk drive does not spin up until the initiator
>	issues a START/STOP UNIT command with the start bit equal to one.
>	(This option is not implemented.)

On the latest revision of the drive these features are supported AND note
that they are reversed. 9-10 are start/stop and 7-8 are parity enable.  By
the way Maxtor plans to replace the 200MB product with a 213MB. The new
product will have 6 zones instead of 3.