Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!van-bc!seac!wain
From: wain@seac.UUCP (Wain Dobson)
Newsgroups: comp.unix.i386
Subject: SCO CONNECT FAST/UUCP
Message-ID: <5669@seac.UUCP>
Date: 8 Aug 90 07:00:00 GMT
Organization: SEAC Software Engineering, Vancouver, B.C.
Lines: 123

What's up with this port. Suddenly, like, today, about 5PM, my
system can't get by the login. Bellow is the output from
uutry --- the important information is at the end of the script.
(Boy, from here, things like this sure can get expensive.)

mchFind called (sco)
list (rmail) num = 1
fillFlds: entered
fillFlds: returning
list (/usr/spool/uucppublic) list (/usr/tmp) num = 2
list (/usr/spool/uucppublic) list (/usr/tmp) num = 2
list (rmail) list (rnews) list (uucp) num = 3
_Request (TRUE), _Switch (TRUE), _CallBack (FALSE), _MyName (), _Commands rmail
_Commands rnews
_Commands uucp
chdir(/usr/spool/uucp/sco)
conn(sco)
Device Type ACU wanted
mlock tty2A succeeded
fixline(5, 19200)
dialer args :/usr/lib/uucp/dialTBIT:-x9:/dev/tty2A:14084250261U:19200
UUCP phone number, stripping 14084250261U
PROTOCOL phone number, got 14084250261
checkbaud claims low/high baud is 016
mdopen(): opening /dev/tty2A
set ioctl on /dev/tty2A, baudrate = 016
Syncing baud rate...aaaaSent MODEM <<ATQ4^M>>-OK
MODEM returned <<^M^JOK^M>>-OK
got OK
...done.
Resetting modem
Sent MODEM <<ATZ^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
Syncing baud rate...aaaaSent MODEM <<ATQ4^M>>-OK
MODEM returned <<^M^JOK^M>>-OK
got OK
...done.
Setting DIAL OUT mode
Sent MODEM <<ATS66=1S110=255^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
Setting UUCP mode
Sent MODEM <<ATS7=60S50=255S111=30^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
DIALING ATDT14084250261
Sent MODEM <<ATDT14084250261^M>>-OK
wait for connect - timeout 243
MODEM returned <<^J^M^JBUSY^M>>-OK
got BUSY
hangup - timeout 243
Sent MODEM <<+++>>-OK
Syncing baud rate...aaaaSent MODEM <<ATQ4^M>>-OK
MODEM returned <<^M^JOK^M>>-OK
got OK
...done.
Sent MODEM <<ATH^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
Disabling escape
Sent MODEM <<ATS2=128^M>>-OK
mdclose(): closing /dev/tty2A
Forked 11202 Wait got 11202 Status 106400
could not connect (phone is busy)
mlock tty2A succeeded
fixline(5, 19200)
dialer args :/usr/lib/uucp/dialTBIT:-x9:/dev/tty2A:14084250261U:19200
UUCP phone number, stripping 14084250261U
PROTOCOL phone number, got 14084250261
checkbaud claims low/high baud is 016
mdopen(): opening /dev/tty2A
set ioctl on /dev/tty2A, baudrate = 016
Syncing baud rate...aaaaSent MODEM <<ATQ4^M>>-OK
MODEM returned <<^M^JOK^M>>-OK
got OK
...done.
Resetting modem
Sent MODEM <<ATZ^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
Syncing baud rate...aaaaSent MODEM <<ATQ4^M>>-OK
MODEM returned <<^M^JOK^M>>-OK
got OK
...done.
Setting DIAL OUT mode
Sent MODEM <<ATS66=1S110=255^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
Setting UUCP mode
Sent MODEM <<ATS7=60S50=255S111=30^M>>-OK
MODEM returned <<^J^M^JOK^M>>-OK
got OK
DIALING ATDT14084250261
Sent MODEM <<ATDT14084250261^M>>-OK
wait for connect - timeout 243
MODEM returned <<^J^M^JRRING^M>>-OK
got RRING
MODEM returned <<^J^M^JRRING^M>>-OK
got RRING
MODEM returned <<^J^M^JCONNECT FAST/UUCP^M>>-OK
got CONNECT FAST/UUCP
Forked 11204 Wait got 11204 Status 0
getto ret 5
sendthem (^M)
expect: (gin:)
^Jtimed out
sendthem (^M)
expect: (gin:)
timed out
sendthem (^M)
expect: (gin:)
timed out
close caller (5)
delock(tty2A)
Call Failed: LOGIN FAILED
exit code 101
Conversation Complete: Status FAILED

TM_cnt: 0
-- 
Wain Dobson, Vancouver, B.C.
	...!{uunet,ubc-cs}!van-bc!seac!wain