Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mq!alan
From: alan@mq.UUCP (Alan H. Mintz)
Newsgroups: comp.unix.xenix
Subject: Re: Setting modem to answer on 4 rings
Message-ID: <33@mq.UUCP>
Date: 10 Aug 90 00:33:56 GMT
References: <26bfab22.7313@petunia.CalPoly.EDU> <1663@ispi.COM>
Distribution: na
Organization: Micro-Quick Systems, Inc.
Lines: 39

In article <1663@ispi.COM>, jbayer@ispi.COM (Jonathan Bayer) writes:
> gritchie@polyslo.CalPoly.EDU (Gary Ritchie) writes:
> >	Thanks for all the help on my last problem with the monochrome
> >monitor.  I've run into another problem I can't figure out.  I'm
> >trying to get my modem to answer on the fourth ring.  I have changed
> >the dialers file to ATS0=4 in the string that resets auto answer.
> >However, the modem is reinitialized to 1 ring answer.  
> >	Next I changed the reinit string to S0=0 to turn off the modem
> >from answering.  No change.  The modem still answers on 1 ring.  Is
> >the modem being reset by something other than the dialers file, and
> >if so, is there anything I can do to change it.
> >	I'm running XENIX 386, the most current version, have the modem
> >set up for tty2A, and the modem is a Hayes 2400.  I used to have 
> >this working on XENIX 286 which was controlled by the dialers
> >file.  Any suggestions?
> 
> The problem is that the modem is being re-initialized by the program
> 		/usr/lib/uucp/dialHA24
> (assuming a Hayes 2400).  You have to modify this program and then recompile
> it on your system.  

As I recall, the dialer used is in the fifth field of the Devices file entry.
It first looks for a binary by that name in /usr/lib/uucp, then it searches the
Dialers file.

If your Devices entry looks like:

       ACU ttyA7 - 300-2400 dialHA24

change it to:

       ACU ttyA7 - 300-2400 hayes2400

If it is already hayes2400, I suspect your modem is resetting itself on DTR
transition. You could connect directly to the modem with 

       cu -lttyA7 dir

issue the ATS0=4&W command to write the desired setting into memory.
--
< Alan H. Mintz             | Voice +1 714 980 1034 >
< Micro-Quick Systems, Inc. | FAX   +1 714 944 3995 >
< 10384 Hillside Road       | uunet:    mq!alan     >
< Alta Loma, CA  91701 USA  | Internet: [pending]   >