Xref: utzoo comp.dcom.modems:6517 comp.unix.xenix:12791
Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!mcgill-vision!snorkelwacker!tut.cis.ohio-state.edu!usenet.ins.cwru.edu!ncoast!nshore!steve
From: steve@nshore.uucp (Stephen Walick)
Newsgroups: comp.dcom.modems,comp.unix.xenix
Subject: Re: Telebit T1000 problems
Message-ID: <1990Aug16.010504.10895@nshore.uucp>
Date: 16 Aug 90 01:05:04 GMT
References: <102@mnopltd.UUCP>
Reply-To: uunet!ncoast!nshore!steve (Stephen J. Walick)
Followup-To: comp.dcom.modems
Organization: Nshore Hacking and Salvage
Lines: 26

As quoted from <102@mnopltd.UUCP> by neal@mnopltd.UUCP:

+---------------
| ->I am having a problem getting a T1000 Telebit to connect properly with
| ->a Trailblazer Plus over standard telephone lines.
| ->
| ->                        ....dialTBIT has never worked, and the TB+ is
| ->run from Dialers and nvram:
| 
| I just know I going to get stomped on for this but, why haven't you used the
| dialTBIT?  Did it need to get compiled?  
+---------------

Not from me, another T1000 Telebit user.  I've already "email"ed a reply,
very similiar to yours, but did note one thing that I found *very* impor-
tant....

SCO's dialTBIT script is for the "Trailblazer" and uses S registers that
are not known to the T1000, viz., the "S111= " register (about file com-
pression) does not appear on the T1000.  I had to comment those references
in the setup and in the script itself or I would run into "mucho" problems.

-- 

Stephen J. Walick, Asst Sysop of the  < XBBS >  program  at  NCoast.ORG
uunet!ncoast!nshore!steve                       nshore!steve@ncoast.org