Xref: utzoo comp.realtime:818 comp.robotics:326
Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!unhd!rg
From: rg@uunet!unhd (Roger Gonzalez )
Newsgroups: comp.realtime,comp.robotics
Subject: Re: DataCube Users Group ???
Message-ID: <1990Aug13.123012.335@uunet!unhd>
Date: 13 Aug 90 12:30:12 GMT
References: <!3!%!M-@rpi.edu>
Reply-To: rg@unhd.UUCP (Roger Gonzalez )
Distribution: usa
Organization: Marine Systems Engineering Lab
Lines: 14

I have played with our datacube boards (Digimax and Roistore) by doing
direct writes to the registers, because I found the provided libraries
confusing.  I have figured out most of how to use the Digimax, but the
Roistore is still mysterious.  I don't believe that there are any newsgroups
that deal specifically with these boards, nor have I seen them mentioned
on the net often.

-Roger

-- 
UUCP:   ..!uunet!unhd!rg      | USPS: Marine Systems Engineering Laboratory
BITNET: r_gonzalez at unhh    |       University of New Hampshire
PHONE:  (603) 862-4600        |       Marine Programs Building
FAX:    (603) 862-4399        |       Durham, NH  03824-3525