Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!bruce!trlluna!shiva!soh
From: soh@shiva.trl.oz (kam hung soh)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Connecting an Amiga to a TTL Monochrome monitor
Keywords: TTL, monochrome, monitor, cable, help
Message-ID: <2087@trlluna.trl.oz>
Date: 16 Aug 90 23:19:44 GMT
References: <816@beguine.UUCP> <2086@trlluna.trl.oz>
Sender: root@trlluna.trl.oz
Lines: 21

soh@pegasus.trl.oz.au (kam hung soh) writes:

>I'd connected my old A1000 to a CGA-type TTL monitor.  The picture was
>refreshingly
>sharp in 640 x 256 (I had a PAL A1000) and almost usable in interlace
>mode.  Them old
>monitors have long persistence phosphor screens!  Unfortunately, the
>monitor did not
>display all colours (due to the digital input).

>To do this, I had to invert the signals of the digital Red, Green and
                                                        ^^^  ^^^^^
>Blue outputs
 ^^^^

AAARGH!  I meant Hsync* and Vsync* outputs!  This should teach me
not to write late in the evening!


Soh, Kam Hung      email: h.soh@trl.oz.au     tel: +61 03 541 6403 
Telecom Research Laboratories, P.O. Box 249, Clayton, Victoria 3168, Australia