Path: utzoo!attcan!uunet!jarthur!usc!rutgers!mephisto!prism!gt4662b
From: gt4662b@prism.gatech.EDU (BRANHAM,JOSEPH FRANKLIN)
Newsgroups: comp.sys.amiga.tech
Subject: Palomax help needed
Keywords: Palomax
Message-ID: <12604@hydra.gatech.EDU>
Date: 15 Aug 90 18:11:53 GMT
Organization: Georgia Institute of Technology
Lines: 43


HELP!! I'm almost completed putting together a Palomax interface. I can even
get the drive to format and read verify. My only problem is that I can't get
the testhd3.1 or the hdconfig3.1 programs to recognize my hdparams file.
Following is what the file looks like:

----------------------------Begin File----------------------------------------
cont F7FFE0
sect 17, 26

DH0:
cyl 306 This is for the Seagate ST412
hds 4
rwi 306
pre 153
ecc 0
stp 2
res 2

DH1:
cyl 650
hds 4
rwi 651
pre 651
ecc 0
stp 1
res 1

---- Comments -----
First drive is ST412
Second Drive is on the way
------------------------------End File----------------------------------

If anyone could look at this, and point out any glaring errors in my file
format--or (even better) mail me their hdparams file, it would make my
beloved amiga very happy.


-- 
<------------------------------------------------------------------------------>
<  FRANK BRANHAM                      | Currently at work on a VERY deranged   >
<  Georgia Institute of Technology    | RPG. No dice needed. Ever. Nasty       >
<  Internet: gt4662b@prism.gatech.edu | things, worse than hobbitses.          >