Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!bruce!trlluna!rhea.trl.oz.au!aduncan
From: aduncan@rhea.trl.oz.au (Allan Duncan)
Newsgroups: comp.sys.amiga.tech
Subject: Pointer needed on bi-direction parallel i/o
Message-ID: <2084@trlluna.trl.oz>
Date: 15 Aug 90 23:05:48 GMT
Sender: root@trlluna.trl.oz
Lines: 12

There are lots of examples around on how to use the serial port, but I'm
interested in bi-directional use of the parallel port.  There appears to
be very little written on the matter - the RKM's are somewhat terse - and
most people steer clear of it.  There are some hardware problems
involved (the connections are not full duplex) so there needs to be some
co-operation on the send and receive, or collision detection hardware,
but I can handle that.  What I really need is examples of the standard
way to interface to it - or I will end up going in at the register level.
Allan Duncan	ACSnet	a.duncan@trl.oz
(03) 541 6708	ARPA	a.duncan%trl.oz.au@uunet.uu.net
		UUCP	{uunet,hplabs,ukc}!munnari!trl.oz!a.duncan
Telecom Research Labs, PO Box 249, Clayton, Victoria, 3168, Australia.