Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!purdue!iuvax!houghton
From: houghton@iuvax.cs.indiana.edu (Ric)
Newsgroups: comp.sys.apollo
Subject: DN3000 disk controller configuration
Message-ID: <54571@iuvax.cs.indiana.edu>
Date: 16 Aug 90 08:46:46 GMT
Sender: houghton@iuvax.cs.indiana.edu
Lines: 32




  I am upgrading an 86meg drive to a 380meg drive and I'm having some
 troubles with the controller.  The manuals that I have are for the 
 older style controllers that came with the original DN3000.  I have
 one of the newer style controllers and I can't get the jumpers set
 correctly.

 Here's the board description, can someone tell me the correct configuration
 for a 380 meg MAXTOR drive?


  Part No. 011914-001       Rev. D         Date 6/8/88


  It has jumpers labeled W4 through W11 on top, (horizontally) and
  then jumpers w14 through w23 toward the right side of the board
  positioned vertically.

  For the 86 meg drive W10, W11, W16, W17, W20, and W23 are jumped.


 
 I've been trying to reach our rep. but he's on vacation.


  Thanks for you time,

    Ric

    houghton@cs.indiana.edu