Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!zaphod.mps.ohio-state.edu!swrinde!ucsd!ucbvax!RICHTER.MIT.EDU!krowitz
From: krowitz@RICHTER.MIT.EDU (David Krowitz)
Newsgroups: comp.sys.apollo
Subject: Re:  DN3000 disk controller configuration
Message-ID: <9008161326.AA06882@richter.mit.edu>
Date: 16 Aug 90 13:26:57 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 19

The 'jumper' program shows the following configuration for the
Ompti 8610 disk controller board:

For the 86 MB drive (72 MB formatted):
W1, W4, W7, W8, W9 should be in. All other jumpers should be
out.

For the 380 MB Maxtor drive (350 MB formatted):
W1, W2, W4, W7, W8, W9, W11 should be in. All other jumpers
should be out. Note that the difference is adding jumpers
to W2 and W11. All others remain the same.


 -- David Krowitz

krowitz@richter.mit.edu   (18.83.0.109)
krowitz%richter.mit.edu@eddie.mit.edu
krowitz%richter.mit.edu@mitvma.bitnet
(in order of decreasing preference)