Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucsd!usc!cs.utexas.edu!lgc.com!root
From: max@maxsun.lgc.com (Max Heffler)
Newsgroups: comp.sys.apple2
Subject: How do I get kermit to go faster than 2400 baud
Keywords: IIGS, TWGS, Telebit Trailblazer, Kermit
Message-ID: <1990Aug13.135356.11691@lgc.com>
Date: 13 Aug 90 13:53:56 GMT
Sender: max@lgc.com
Organization: Landmark Graphics Corp., Houston, Tx
Lines: 12
Nntp-Posting-Host: maxsun.lgc.com

I am using an Apple IIGS with a Transwarp GA and a Telebit Trailblazer plus
modem to connect to another telebit at the office.  When the connection was
made at 19200 baud on both ends, the Telebit responded with Fast Connect
implying that I had a 19200 baud connection; however, the throughput I
measured under kermit was only around 2400 Baud.  Does anyone know how to
transmit at a faster rate with kermit, or possibly some other comm. program?
Thanx in advance...
--
Max Heffler			internet: max@lgc.com
Landmark Graphics Corp.		uucp: ..!uunet!lgc!max
333 Cypress Run, Suite 100      phone: (713) 579-4751
Houston, Texas  77094