Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!nuchat!paul
From: paul@nuchat.UUCP (Paul Hutmacher)
Newsgroups: comp.sys.apple2
Subject: Re: High Speed SCSI Card
Message-ID: <27302@nuchat.UUCP>
Date: 19 Aug 90 09:24:39 GMT
References: <0093B4320BE22180.00000111@dcs.simpact.com>
Reply-To: paul@nuchat.UUCP (Paul Hutmacher)
Organization: Houston Public Access
Lines: 17

In article <0093B4320BE22180.00000111@dcs.simpact.com> whitewolf@gnh-starport.cts.com (Tae Song) writes:
>Plug the old rev c SCSI card and low-level format to what-ever interleave you
>want, the high-level (ProDOS format/initalize), partition, than plug the DMA
>SCSI card and you're ready to go.

The only flaw with this is most of us do not have an "old" card laying around
to plug in.

I upgraded my system from a CMS SCSI card to the DMA SCSI card.

Perhaps someone can tell us what interleave the partitioning software that
came with the controller leaves us with.

-- 
Paul Hutmacher   |       paul@nuchat.UUCP        |Sometimes the only thing a
P.O. Box 66046   | {texbell, uunet}!nuchat!paul  |western savage understands
Houston, TX 77266| paul%nuchat.uucp@uhnix1.uh.edu|are whiskey and rifles and
713/526-0612 CDT |        Take it Deedee!        |an unarmed man like you.