Xref: utzoo comp.sys.ibm.pc.misc:762 comp.sys.ibm.pc.hardware:884
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rutgers!psuvax1!psuvm!jam167
From: JAM167@psuvm.psu.edu
Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
Subject: HELP - Hard Drive Problems
Message-ID: <90226.185659JAM167@psuvm.psu.edu>
Date: 14 Aug 90 22:56:59 GMT
Organization: Penn State University
Lines: 10

I have a SEGATE ST251 with a noname controller in a noname AT compatible.
PROBLEM:
     When I format the drive (with or without the DISK MANAGER SOFTWARE)
it works fine until I power down.  Upon power up, the disk is not recognized
and the partition table is usually empty. (Various things have happened, but
this is the most common error I have encountered...)

ANY suggestions would be greatly appreciated.  Thanks.

-- Jim Meyers : Penn State Great Valley