Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!mcgill-vision!snorkelwacker!bloom-beacon!primerd!ENI!S55!CUMMINGS
From: CUMMINGS@S55.Prime.COM
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: Disabling COM1 on Leading Edge D3 '
Message-ID: <1249900003@S55.Prime.COM>
Date: 15 Aug 90 17:05:00 GMT
References: <5970740@<manning>
Lines: 18
Nf-ID: #R:<manning:-597074060:S55:1249900003:000:888
Nf-From: S55.Prime.COM!CUMMINGS    Aug 15 17:05:00 1990


Evan, any chance you can configure your modem as COM3 or COM4 and
avoid the COM port conflict?  Most GOOD software (like Kermit or
PROCOMM or TELIX or etc (please no flames if I left your favorite
comm program out of this list!) work just fine with COM3 and COM4.

============================================================================
Kevin J. Cummings                       Prime Computer Inc.
20 Briarwood Road                       500 Old Connecticut Path
Framingham, Mass.                       Framingham, Mass.

InterNet:  CUMMINGS@S55.Prime.COM
CSNet:     CUMMINGS%S55.Prime.COM@RELAY.CS.NET
UUCP:      {uunet, csnet-relay}!S55.Prime.COM!CUMMINGS

Std. Disclaimer: "Mr. McKittrick, after careful consideration, I've come
                  to the conclusion that your new defense system SUCKS..."
============================================================================