Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!zaphod.mps.ohio-state.edu!wuarchive!mit-eddie!uw-beaver!ubc-cs!alberta!herald.usask.ca!news
From: reeves@dvinci (Malcolm Reeves)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: AT&T 6300 -- can I put on a low density 3.5" drive?
Message-ID: <1990Aug16.040621.17023@herald.usask.ca>
Date: 16 Aug 90 04:06:21 GMT
References: <24072@uflorida.cis.ufl.EDU>
Sender: news@herald.usask.ca (USENET News System)
Reply-To: reeves@dvinci
Distribution: comp.sys.ibm.pc.hardware
Organization: University of Saskatchewan
Lines: 9

From article <24072@uflorida.cis.ufl.EDU>, by fred@beach.cis.ufl.edu (Fred Buhl):
> The subject header says it all.  Has _anybody_ attempted to do this on
> this particularly weird PC?

Yes, I am within 200 feet of 20-30 PC-6300's with 720Kb 31/2" floppy drives.
Use the drivparm= line in config.sys and the drives work fine. See your
AT&T DOS manual for details. Installation takes about 5 mins - remember to
set the motherboard switch to at least 2 floppy drives, fix config.sys and
thats it.