Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!decwrl!elroy.jpl.nasa.gov!suned1!efb
From: efb@suned1.Nswses.Navy.MIL (Everett Batey)
Newsgroups: comp.sys.ibm.pc.misc
Subject: DESQV-386, DTK, WP5.1 Disharmony
Summary: Turns screen to grid over text
Keywords: DV-386, WP5.1, DTK-386, Herc, and Port3-4
Message-ID: <5126@suned1.Nswses.Navy.MIL>
Date: 13 Aug 90 07:51:19 GMT
Reply-To: efb@suned1.Nswses.Navy.MIL (Everett F Batey II)
Distribution: na
Organization: NSWSES, Port Hueneme, CA
Lines: 22

Really like the DESQView 386 ( 2.26, QEMM, etc ) choice on my DTK ( Data
Tech ) 386-20 PC.  Unfortunately, when I first load Wordperfect 5.1, 2d -
print a document, 3d complete printing, 4th Load Tobias MYM or Kermit 3.01
or some other major piece of code and 5th return to Wordperfect, I get the
graphic uglies on my herc display ( DM3088A card ).  Looks like 10H to 2,3V
matrix over entire screen with overall rectangles about 1/4 to 1/3 inch 
across.  Behind this grid I can see where the print was on the screen.  Only
way out of this window is <Ctl><Alt><DEL> which clears this window MOST of 
the time.  This bug is not 100 pct repeatable.  Looking for similar exper-
iences.  I dont know where to hang the rap and dont have monitor or driver
to swap in.  I have NO other problems with DV, other than a much slower 
COMn port when LapLink ran 115KB, now slows to 38KB.

While I am borrowing this much bandwidth, anyone with 25Dollar Net find a
serial board that runs off some other INT than the COM1 COM2 normal values?
Need my mouse and modem.  

Thanks /Ev/
-- 
 +  efb@suned1.nswses.Navy.MIL efb@elroy.JPL.Nasa.Gov  efb@voodoo.bitnet  +
 +  efb@suned1.UUCP | Gold Coast Sun Users | Vta-SB-SLO DECUS |  WA6CRE   +
 +  Statements, Opinions, MINE, NOT Uncle Sam_s | News Postmaster DNS guy +