Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!dlg6627
From: dlg6627@uxa.cso.uiuc.edu
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: HELP - Hard Drive Problems
Message-ID: <46500151@uxa.cso.uiuc.edu>
Date: 16 Aug 90 20:11:00 GMT
References: <185659@<90226>
Lines: 16
Nf-ID: #R:<90226:185659:uxa.cso.uiuc.edu:46500151:000:539
Nf-From: uxa.cso.uiuc.edu!dlg6627    Aug 16 15:11:00 1990


>I have a SEGATE ST251 with a noname controller in a noname AT compatible.
>PROBLEM:
>     When I format the drive (with or without the DISK MANAGER SOFTWARE)
>it works fine until I power down.  Upon power up, the disk is not recognized
>and the partition table is usually empty. (Various things have happened, but
>this is the most common error I have encountered...)

>ANY suggestions would be greatly appreciated.  Thanks.


make sure that DEVICE=DMDRVR.BIN is in your config.sys file

>-- Jim Meyers : Penn State Great Valley

 -- DL