Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!wuarchive!udel!burdvax!hpwisf1!starner
From: starner@ISF.Unisys.COM (Mark Starner)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Adding 3rd Hard Drive to AT clone
Message-ID: <414@hpwisf1.ISF.Unisys.COM>
Date: 17 Aug 90 23:57:13 GMT
Sender: news@ISF.Unisys.COM
Organization: Unisys Corp, ISF, Hanover, MD
Lines: 27

I am attempting to add a third hard drive to my NEC Powermate I AT clone.

I have a WD1003-WAH hard disk controller with two hard drives attached.
I also have a FileCard 20  with a WDC 60-000227-01 controller.

I have configured the 1003 as controller 1, and configured the 60-000227 as
the second controller at BIOS address CA00. I can't get it to recognize the
drives. When I try to boot, the D drive on the 1003 and the Drive on the
File Card start *chirping* and everything seems to stop. I suspect a Port
conflict or some such problem. I don't quite understand completely how
the system addresses the drives on the first and second controllers. Do
they share ports/per/controller? I can configure the controller on the
Hard Card for ports 320 or 324 Hex.

I don't have any tech sheets on the 1003, so i am not sure exactly how it
is configured.

Anyone else accomplish this? Is it a futile effort? I'd really like to use
this filecard for *slow* storage.

Thanks

--
-------------
Mark Starner
Unisys Corporation/Integration Support Facility
starner@isf.unisys.com