Xref: utzoo comp.sys.mac.hardware:4871 comp.sys.mac.misc:2317
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!uakari.primate.wisc.edu!aplcen!uunet!camex!circus!paulb
From: paulb@circus.camex.com (Paul Braiman)
Newsgroups: comp.sys.mac.hardware,comp.sys.mac.misc
Subject: Memory problem
Message-ID: <1492@camex.COM>
Date: 17 Aug 90 11:57:49 GMT
Sender: news@Camex.COM
Lines: 20

I have a 18 month old Macintosh SE/HD20 with 1Mb of RAM.

I recently installed (2) 1Mb SIMMS (80ns) by removing the two low density SIMMS
from slots 3 and 4 and replacing them with the higher density chips and changed
the jumper from the 1M position to the 2M/4M position.

When I started up and checked the total memory under "About Finder", only 2048k were showing and not the 2560k that should have been.

I later installed two more 1Mb SIMMS into slots 1 and 2 giving me a total of 4Mb and double checked that the jumper was in the correct position.

When I checked the total memory again, still only 2048k were showing.

What, if anything, is wrong with my computer or have I done something
incorrectly?

If you have any ideas, please email me.  Thanks.
-------------------------------------------------------------------------------
(paulb@camex.com)  | "It has been my experience that folks who have no vices
		   |  have very few virtues" -Abraham Lincoln (1809-1865)
-------------------------------------------------------------------------------