Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!rpi!uupsi!rodan!rodan.acs.syr.edu!fadushin
From: fadushin@rodan.acs.syr.edu (Phred Dushin)
Newsgroups: comp.sys.mac.hardware
Subject: Opening a LaCie 30mg drive?
Message-ID: <4236@rodan.acs.syr.edu>
Date: 19 Aug 90 18:00:22 GMT
Sender: fadushin@rodan.acs.syr.edu
Reply-To: fadushin@rodan.acs.syr.edu (Phred Dushin)
Organization: Syracuse University, Syracuse, NY
Lines: 13

While unscrewing the scsi cable from my LaCie 30mg Cirrus drive,
I inadvertantly removed one of the screws that holds in the scsi
connector, thereby dropping what sounds like a nut and an washer
into the inside of the casing.  Does anyone out there know how to 
pull one of these cases apart?  There are only two screws on the
back of the drive, which look like they hold the fan in, and
I doubt pulling them off would accomplish much.

Any advice?

Fred Dushin  				Syracuse University, Syracuse, NY
Internet:				Bitnet:
fadushin@rodan.acs.syr.edu 		fadushin@sunrise.bitnet