Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!umich!samsung!know!zaphod.mps.ohio-state.edu!swrinde!ucsd!pacbell.com!pacbell!well!lmeyer
From: lmeyer@well.sf.ca.us (lhary meyer)
Newsgroups: comp.sys.sgi
Subject: Re: StereoView raster sizes
Message-ID: <19602@well.sf.ca.us>
Date: 18 Aug 90 03:27:35 GMT
References: <9008142019.AA14083@chem.chem.ucsd.edu>
Organization: Whole Earth 'Lectronic Link, Sausalito, CA
Lines: 14



Steve I hope you got my mai on the subject. Have you adjusted the vertical
height on the MItsubishi to the aspect ratio you like? You might need to 
compromise between the stereo & planar modes. Set the mode switch inside the
little door to "0". Then select the function you want to tweak on the other
rotary switch. (The left slide switch needs to be in "adjust"). Press the 
little button on the lower right (cant remember the label), and the green LED
will flash. Use + / - to set to taste , then hit the lower right button again.
This will memorize the setting. I think vertical size is function 5.

The Mits is a nice monitor and the newer HL6915 is even better!

    -------- 00 --------   Lhary Meyer    Stereographics