Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!uakari.primate.wisc.edu!aplcen!uunet!mcsun!cernvax!chx400!urz.unibas.ch!frank
From: frank@urz.unibas.ch
Newsgroups: comp.terminals
Subject: Re: Help needed with VT102 terminal
Message-ID: <1990Aug13.221510.894@urz.unibas.ch>
Date: 13 Aug 90 21:15:10 GMT
References: <8603.26c2c0bf@ohstpy.mps.ohio-state.edu>
Organization: University of Basel, Switzerland
Lines: 17

In article <8603.26c2c0bf@ohstpy.mps.ohio-state.edu>, mitchell@ohstpy.mps.ohio-state.edu writes:
> 
>    I have recently purchased a used Digital VT102 terminal.  The problem
> is that I have no idea what the "set up" bits do because they are not
> labled.  There are 7 blocks with 4 bits each.  Can someone please discribe
> the purpose of each bit to me.  It would be a great help.
> 
>             MUCH THANKS
>                  
>                     Tom 

Take a look at the underside of the keyboard. It should have a label
sticked to it with all the descriptions you need!
(if your one of the very unlucky ones, well I can get you the data, but not 
before next week..)

Robert